FMA6613流量計 美國omega

多參數流量計
FMA6600 and FMA6700 Series
1年保修 CE
多參數流量計
FMA6600和FMA6700系列：多參數流量計
FMA6701
的256個單位的多點能力（RS-485選項）
存儲校準數據多達10個不同的氣體
支持10種不同的單位工程包括用戶定義的
可編程的12位數字積算儀顯示氣體總體積
與繼電器輸出高、低氣體流量報警限值
壓力報警（FMA6700）與繼電器輸出高、低氣壓的限制
溫度報警（FMA6700）與繼電器輸出高和低的氣體溫度范圍
數字（RS-232或RS-485）和模擬輸出同時操作
多達32個氣體內部轉換因素
接口
FMA6600和FMA6700系列的流量儀表可以通過當地的四個按鍵和LCD訪問所有功能。數字接口通過RS485（可選RS-232可用），提供了適用的內部數據包括：流量，溫度，壓力讀數，自動歸零，積算儀和報警設置，煤氣表，單位選擇轉換因子和工程，調整表格的動態響應補償和線性化。模擬接口提供0至5伏或0至10伏或4到20毫安輸出的流量，壓力和溫度（跳線選擇）。
自動調零
FMA6600 FMA6700系列的，支持自動傳感器零偏移調整，可以通過按鍵激活本地或遠程通過數字接口。自動歸零功能，不需要通過儀表自動調零過程。規定了可以啟動，停止或保存當前汽車零值通過數字指令。
積算儀
氣體的總體積是由實際氣體流量對時間的積分計算。兩鍵盤菜單和數字接口命令設置：設置積算儀零開始累加器在預先設定的流量在一個預設的總體積累加積算儀積算儀讀取啟動/停止條件的流動成為真正的分配動作，當累加器讀“站在總體積相等。
流量報警
高和低的氣體流量報警限值可預先通過鍵盤或遠程通過數字接口。報警條件下成為真正的電流讀數時，等于或高于/低于高、低報警等級對應值。報警動作可以分配預定延遲時間間隔（0-3600秒）激活緊密（單獨的高、低報警）。壓力報警（FMA6700系列）高、低氣壓報警限值可預先通過鍵盤或遠程通過數字接口。壓力報警條件下成為真正的當前壓力讀數等于或高于相應的值的壓力高報警設置或等于或低于低壓報警設置相應的值。報警動作可以分配給激活接觸緊密（單獨的高、低壓力報警）。溫度報警（FMA6700系列）高、低溫度報警限值可預先通過鍵盤或遠程通過數字接口。溫度報警條件下成為真正的當前溫度讀數等于或高于相應值的高溫報警設置或等于或低于低溫報警設置相應的值。報警動作可以分配給激活接觸緊密（單獨的高、低溫度報警）。
單位工程
流量設定點，以及相關的氣體流量測量積算數據工程單位直接縮放通過前面板按鍵或數字接口。以下測量單位的支持：% FS，升/分鐘，升/小時，毫升/分鐘，ml／h，SCFH，立方英尺，LBPH，lbpm，用戶定義的歐盟。
多氣體校準
FMA6600系列的能夠存儲多達10個氣體主要校準數據。此功能允許相同F(xiàn)MA6600系列進行校準的多氣體而在每個維持額定精度。
標準10點NIST校準
可選多達9個額外的10點校準可以額外收費每氣命令。
轉換因子
高達32的氣體轉換系數存儲在FMA6600和FMA 6700系列。此外，提供了一個用戶定義的轉換因子。轉換因子可以應用于任何十氣體校準通過鍵盤或數字接口命令。
觸點閉合
兩組干觸點繼電器輸出提供給用戶提供的設備驅動。這些都是可編程通過本地鍵盤或數字接口，繼電器可以使開關在的事件發生（例如，當一個低或高流量，壓力或溫度超過報警限或當累計達到規定值）。
泄漏完整性
1×10-9 SCCS氦zui大的外部環境。
FMA6600 / FMA6700傳感器不能用于監測氧氣除非特別的清洗和準備的應用。下面的命令的細節。

規格
Accuracy:
FMA6700: ±1% of FS including linearity [0 to 50°C and 0.35 to 6.8 bar (5 to 100 psia)]
FMA6600: ±1% of FS at calibration conditions [101 KPa (14.7 psia) and 21.1°C (70°F)]
Pressure Range: 0 to 6.8 bar (100 psig) (measurement)
Pressure Accuracy: ±1% of FS
Temperature Range: 0 to 50°C (measurement)
Temperature Accuracy: ±1°C
Repeatability: ±0.15% of full scale
Response Time: Units up to 10 LPM @1.0 second, units greater than 10 LPM @2 seconds to within ±2% of setpoint over 25% to 100% of full scale
Temp. Coefficient: 0.15% of full scale/°C or better
Pressure Coefficient: 0.01% of full scale/psi (0.07 bar) or better
Max Gas Pressure: 6.8 bar (100 psig)
Max Burst Pressure: 13.6 bar (200 psig)
Max Pressure Drop: 8 psi (at 100 L/min flow)
Gas & Ambient Temp: 5 to 50°C (41 to 122°F)
Output Signals: Linear 0 to 5 Vdc (3000 Ω min load impedance); 0 to 10 Vdc (6000 Ω min impedance); 4 to 20 mA optional (500 . max loop resistance). Maximum noise 20 mV peak to peak.
Input Power: May be configured for three different options: ±15Vdc (±200 mA maximum); +12Vdc (300 mA maximum) optional; +24Vdc (250 mA maximum) optional; Circuit boards have built-in polarity reversal protection. Resettable fuses provide power input protection.
Materials in Fluid Contact: 316 stainless steel, FKM O-rings. EPDM or Perfluoroelastomer O-rings optional
Connections:
Models ≥15 LPM: Standard 1/4" compression fittings
Models 20 to 50 LPM: Standard 1/4" compression fittings
Models 60 to 100 LPM: Standard 3/8" compression fittings
Display: 128 x 64 graphic LCD with backlight (up to 8 lines of text)
Calibration: Standard one 10 points NIST calibration. Optional up to 9 additional calibrations may be ordered for an additional charge per gas.
CE Compliance: EN 55011 class 1, class B; EN50082-1
Environmental (per IEC 664): Installation Level II; Pollution Degree II
Approximate Shipping Weights:
Models up to 15 SLPM: 1.68 kg (3.7 lb)
Models from 20 to 100 LPM: 1.97 kg (4.34 lb)

產品型號  產品描述
Flow Meters
FMA6601  Max Flow 10 cc/min 1/4' Compression Fitting
FMA6602  Max Flow 20 cc/min 1/4' Compression Fitting
FMA6603  Max Flow 50 cc/min 1/4' Compression Fitting
FMA6604  Max Flow 100 cc/min 1/4' Compression Fitting
FMA6605  Max Flow 200 cc/min 1/4' Compression Fitting
FMA6606  Max Flow 500 cc/min 1/4' Compression Fitting
FMA6607  Max Flow 1 LPM 1/4' Compression Fitting
FMA6608  Max Flow 2 LPM 1/4' Compression Fitting
FMA6609  Max Flow 5 LPM 1/4' Compression Fitting
FMA6610  Max Flow 10 LPM 1/4' Compression Fitting
FMA6611  Max Flow 15 LPM 1/4' Compression Fitting
FMA6612  Max Flow 20 LPM 1/4' Compression Fitting
FMA6613  Max Flow 30 LPM 1/4' Compression Fitting
FMA6614  Max Flow 40 LPM 1/4' Compression Fitting
FMA6615  Max Flow 50 LPM 1/4' Compression Fitting
FMA6616  Max Flow 60 LPM 3/8' Compression Fitting
FMA6617  Max Flow 80 LPM 3/8' Compression Fitting
FMA6618  Max Flow 100 LPM 3/8' Compression Fitting
Flow Meters with Pressure and Temperature
FMA6701  Max Flow 10 cc/min 1/4' Compression Fitting
FMA6702  Max Flow 20 cc/min 1/4' Compression Fitting
FMA6703  Max Flow 50 cc/min 1/4' Compression Fitting
FMA6704  Max Flow 100 cc/min 1/4' Compression Fitting
FMA6705  Max Flow 200 cc/min 1/4' Compression Fitting
FMA6706  Max Flow 500 cc/min 1/4' Compression Fitting
FMA6707  Max Flow 1 LPM 1/4' Compression Fitting
FMA6708  Max Flow 2 LPM 1/4' Compression Fitting
FMA6709  Max Flow 5 LPM 1/4' Compression Fitting
FMA6710  Max Flow 10 LPM 1/4' Compression Fitting
FMA6711  Max Flow 15 LPM 1/4' Compression Fitting
FMA6712  Max Flow 20 LPM 1/4' Compression Fitting
FMA6713  Max Flow 30 LPM 1/4' Compression Fitting
FMA6714  Max Flow 40 LPM 1/4' Compression Fitting
FMA6715  Max Flow 50 LPM 1/4' Compression Fitting
FMA6716  Max Flow 60 LPM 3/8' Compression Fitting
FMA6717  Max Flow 80 LPM 3/8' Compression Fitting
FMA6718  Max Flow 100 LPM 3/8' Compression Fitting
Accessories
FMA66-PW  115 Vac to ±15 Vdc power supply
FMA66-12PW  115 Vac to 12 Vdc power supply
FMA66-24PW  115 Vac to 24 Vdc power supply
FMA66-230EU  239 Vac to ±15 Vdc power supply
FMA66-12PW-230EU  230 Vac to 12 Vdc power supply
FMA66-24PW-230EU  230 Vac to 24 Vdc power supply
FMA65-C  Replacement cable, 25-pin D connector with 1.8 m (6') wire branch to power supply

注釋: Comes complete with operator’s manual and NIST traceable certificate for Nitrogen.
Power supply sold separay.
Note: Flow rates are stated for Nitrogen at STP conditions (21.1°C (70°F) at 1 atm).
For 12Vdc power, add suffix "-12VDC" to model number; add $100 to price.
For 24Vdc power, add suffix "-24VDC" to model number; add $200 to price.
For perfloroelastomer, Buna or EPR o-rings, VCR fittings, or RS232 communications, consult Flow Engineering for a quote.
For each additional calibration add -(*) to the part number and $300.00 to the cost.
Calibrations done at ambient temperature only.
For Oxygen cleaned units, add suffix "-C" to the model number; add $125 to price.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

產品型號說明

(1) (2) (3)
FMA
選項描述
(1) Model Type
選擇
66 代表 Flowmeter
67 代表 Flow/Pressure/Temperature meter
(2) Range (N2)
選擇
01 代表 10 SCCM
02 代表 20 SCCM
03 代表 50 SCCM
04 代表 100 SCCM
05 代表 200 SCCM
06 代表 500 SCCM
07 代表 1 SLM
08 代表 2 SLM
09 代表 5 SLM
10 代表 10 SLM
11 代表 15 SLM
12 代表 20 SLM
13 代表 30 SLM
14 代表 40 SLM
15 代表 50 SLM
16 代表 60 SLM
17 代表 80 SLM
18 代表 100 SLM
(3) Options
選擇
Nothing(leave field blank) 代表 no options (standard unit)
-I 代表 4 to 20 mA output (replaces std 0 to 5 V)
-12V 代表 12 Vdc power
-24V 代表 24 Vdc power
-K 代表 Perfluoroelastomer o-rings
-B 代表 Buna o-rings
-E 代表 EPR o-rings
-VCR 代表 VCR fittings
-RS232 代表 RS232 communications (replaces std RS485)

FMA6613流量計 美國omega